Professional: mechanical engineering, opto-mechanical systems, engineering mechanics, mechanical and electrical and thermodynamic direction and other related professional

Responsibilities

a. Remote sensing camera optical machine structure design, finite element simulation, tooling design;

B. Product thermal test and assist in final assembly.

Specific requirements

a. Proficient in optical precision mechanical design and testing methods;

B. Proficient in mechanical system or motion mechanism design and analysis;

c. Proficient in finite element analysis or structural optimization design methods;

d. Have a solid mechanical principle and mechanical design foundation;

e. skilled use of three-dimensional mechanical design and simulation software;

f. Participate in intellectual property, quality analysis, technical support, etc;

g. Strong hands-on ability to bear hardships and stand hard work;

h. Bachelor degree or above, master degree is preferred; experience in complex precision instrument design is preferred;

Professional: Power electronics, electrical engineering, electronic information engineering and automation and other related professional

Responsibilities

a. responsible for ccd, cmos detector drive circuit, data processing circuit, power conversion circuit design, detailed design, development plan;

B. Responsible for hardware design, including device selection, principle verification, schematic diagram, circuit simulation calculation, etc;

c. Responsible for trial production, debugging, verification and sample delivery of imaging circuits;

d. Responsible for the collation and output of imaging circuit hardware design documents, DFMEA, etc;

e. Responsible for completing the hardware design according to the project development requirements, following up the testing process and problem solving, and promoting the product conversion;

f. Participate in intellectual property, quality analysis, technical support, etc;

g. Instruct test engineers and circuit structure engineers to design and simulate relevant circuit modules, as well as develop hardware echelon talents.

Specific requirements

a. Power electronics, electrical engineering, electronic information engineering and automation and other related professional, master degree;

B. Experience in complex circuit, PCB design above 14 layers;

c. Experience in high-speed data interface design, such as DDR2, Serdes, PCIE, etc;

d. Photoelectric circuit design experience is preferred.

Professional: Electronics, communications, computer and other related majors

Responsibilities

a. Responsible for CCD, CMOS imaging circuit software requirements analysis, feasibility analysis, program development;

B. Responsible for checking the correctness of FPGA related schematic connection;

c. Responsible for imaging circuit FPGA engineering code writing, simulation, including detector drive, CAN bus interface, image format, data interface timing control, etc;

d. Responsible for debugging, testing and debugging of FPGA logic board;

e. Responsible for cooperating with customers to complete the function development;

f. responsible for the subsequent upgrade and maintenance of the project;

g. responsible for key technology breakthroughs, technology sharing and training of new detectors.

Specific requirements

a. bachelor degree or above, major in electronics, computer or communication;

B. Proficient in using xilinx v5\V7 FPGA, proficient in using VHDL/Verilog, with more than 1w lines of code, and experience in ddr2/hdmi/PCIE high-speed digital signal processing.

c. Experience in imaging circuit programming is preferred

d. skilled use of Modelsim simulation;

Proficient in using Visio software to draw program block diagrams, flow diagrams, etc;

Major: Optical Engineering, Physics

Job Responsibilities

a. Provide solutions for visible light and infrared imaging systems, laser communication systems, etc., based on product requirements;

b. Responsible for the testing and assembly of optical components;

c. Responsible for the analysis, production follow-up, testing, and image quality analysis and feedback of optical systems;

d. Responsible for the preliminary research of optical-related technologies, completing principle and technology demonstration, verification machine construction, and testing platform design.

Specific Requirements

a. Optics, optical engineering, or related majors;

b. Possess solid basic knowledge of geometrical optics and physical optics, and be proficient in optical design analysis and simulation skills;

c. Priority will be given to candidates with experience in the development of imaging systems and laser communication systems;

d. Possess strong logical thinking, communication, and teamwork abilities.

Major: Thermophysics, Measurement and Control Engineering, Aerospace Engineering, etc.

Job Responsibilities

a. Operation and maintenance of thermal testing equipment (temperature circulating chambers and vacuum chambers);

b. Interpretation of thermal test data;

c. Report writing;

d. Thermal design, thermal simulation, thermal control implementation, and thermal experiments.

Specific Requirements

a. Basic knowledge of thermal theory, familiar with thermodynamics, engineering thermophysics, etc.;

b. Responsible for operating instruments and equipment as required, conducting temperature tests, undertaking test duty assignments, and completing process records;

c. Responsible for customer service, test implementation, and quality supervision during the testing process;

d. Responsible for the preparation and review of test reports;

e. Responsible for the maintenance, upkeep, repair, verification, and weekly inspection/confirmation of the assigned instruments and equipment;

f. Responsible for the maintenance and repair of the assigned test infrastructure;

g. Responsible for supervising the implementation of subcontracted tests;

h. Major Requirements: Thermophysics, Measurement and Control Engineering, Aerospace Engineering, or related majors.

Professional:Computer and other related majors

Responsibilities

a. Participate in the formulation of technical schemes for image quality evaluation, radiation calibration and geometric calibration;

B. Responsible for camera image processing, analysis and algorithm development;

c. Responsible for on-orbit image processing algorithm development and suppression;

d. Write FPGA design documents, test reports, and technical support documents.

e. Assist hardware engineer to complete FPGA hardware development

f. Participate in hardware integration and testing of FPGA projects, and collaborate with hardware engineers to solve technical problems.

Specific requirements

a. FPGA-related learning or working experience, able to complete FPGA logic design and algorithm programming.

B. Skilled Verilog HDL/VHDL to write FPGA code and simulation test.

c. Experience in the development of image algorithms, preferably for remote sensing, security, autonomous driving and other images. (opencv library)

d. have the experience of cross compilation, can achieve cross-platform development and code migration work content.

Bonus

a.familiar with Xilinx Zynq series chips and development environment;

B.understanding of high-speed data transmission protocols, such as PCIE,CameraLink,Serdes, etc;

c.using HLS, Matlab System Generator for algorithm transplantation;

d.uses C/C /Python for algorithm development.

Professional:optical engineering, precision instruments and other professional

Responsibilities

a. Installation and adjustment scheme and process;

B. Lens adjustment, system integration, focal plane splicing;

c. Image quality test, calibration and distortion test;

d. System assembly;

e. optical equipment, mechanical equipment maintenance;

Specific requirements

a. major in optical engineering, with experience in applied optics, physical optics, etc. Graduate students and above;

B. practical experience in optical alignment testing is preferred;

c. familiar with the use of zygo and other interferometers, and have experience in the use of theodolite, autocollimator and other instruments;

d. Be familiar with optical interferometry and angle measurement, understand the principle of optical interferometry, and have an understanding of angle measurement using optical methods;

e. skilled use of zemax, codev and other optical software;

f. Participate in intellectual property, quality analysis, technical support, etc.

Professional:Mechanical engineering related major

Responsibilities

a. read drawings, make some small tools, small tools, strong operation ability, careful

Specific requirements

a. Mechanical related major, college or above;

B. Familiar with the use of lathes, milling machines, drilling machines, relevant experience is preferred;

c. Proficient in using CAD and other mechanical design software, operating commonly used machine tools;

d. Under 35 years of age;

e. Be meticulous, responsible and love to learn.

Professional:science and engineering background preferred

Responsibilities

a. According to the sales and collection plan, complete the annual and monthly sales and collection task objectives;

B. Grasp the current situation and development trend of the industry market, effectively integrate resources and promote work;

c. Responsible for the research of the same industry market environment analysis, competitive situation analysis, product analysis, etc;

d. Making bid documents and organizing to participate in bid negotiation and bidding activities;

e. Be responsible for contract negotiation and signing, and organize the review of the whole process before, during and after the contract;

f. Implement dynamic tracking management of contract performance, establish contract management accounts, monitor and evaluate the quality of contract performance, and propose risk prevention countermeasures;

g. independently develop the market, establish and maintain market relations, develop customers, and be able to effectively tap demand information;

h. Implement customer visits and active service, establish customer communication channels, maintain customer relationships, handle customer complaints, establish complete customer information files and ledgers, and organize the "three guarantees" maintenance and maintenance of after-sales products.

Specific requirements

a. engaged in the field of aerospace, familiar with aerospace payload products and technology, with space resources is preferred;

B. At least 2 years marketing management experience;

c. Experience in important conference reception or bidding activities;

d. can accept business trip.